Page 28 - 2023刀把型錄

螺帽選用說明

Description For Choosing Nut
Standard ER collet chuck body

ER-BR Ball bearing and nut are specially PFC強力高速型銑刀刀把
High speed ball bearing machined, which are suitable for
nut high speed application.
高速鋼珠螺帽 鋼珠及螺帽皆經過特殊加工，可 HIGH SPEED POWER MILLING CHUCK 3350 Nm
適用於高速加工 precision for professionals
適用於高轉速之強力銑刀刀把
標準ER刀柄本體 ER-B Better clamping force and accuracy

Standard ER collet chuck body Ball bearing nut thus more suitable for very precise
machining.
鋼珠螺帽 PF-Clamp
可提昇夾持力及精度，適用於高
精度加工

The new
ER Suitable for general machining. tool assembly device
Standard nut
一般場合使用
一般標準螺帽 鎖刀座

Run out ≤ 5µ can be obtained by yes of the PARFAITE HP grade 3µ collet. 刀具偏擺 ≤ 0.01mm
配合PARFAITE HP級3µ 筒夾，偏擺可達≤5µ Run Out ≤ 0.01mm
主要特點
4倍長，最長100mm
ER Slim collet chuck body • 刀具組裝與分解過程極其穩定、安全。
• 使用輕巧，僅需較小的鎖緊力即可完成刀具裝卸。
ER-MS The outer diameter is same as • 不需其他工具，即可輕鬆完成各種規格更換。
ER High speed slim nut ER-M nut but the immersion is PF-Clamp
symmetrical. It is suitable for high • 可對應多種錐柄型式DIN、BT、CAT、HSK、CAPTO、
高速小徑螺帽 speed machining. KM、VDI。 Sensationally simply – simply sensationally

高夾持力
外徑尺寸與ER-M相同，但尺寸 • 採用更換式黃銅套來保護刀把的柄部。
對稱，可適用於高速加工 High Clamping Torque The new
小徑ER刀柄本體 • 鎖刀座採小體積設計，佔用面積僅140mmX100mm。 tool assembly device
相同的鎖緊扭力下，可高達數十倍夾持扭力
ER Slim collet chuck body ER-M The outer diameter of nut is smaller
ER Slim nut than standard nut. It is suitable in • Secure tool assembling
the situation of interference.
小徑螺帽 • minimum locking force needed
外徑尺寸較標準螺帽小，適用 • Quick-change function for different taper
於有干涉之場合 interfaces - w/o additional tooling
• Accident free assembling of cutting tools
Standard PFK collet chuck body • Spring-loaded locking pin
• Mechanical security pin
PFK-S Better run-out and low noise when • Better tool clamping thanks
PFK High speed round nut rotating thus more suitable for high to optimum ergonomics
speed application. • Replaceable brass tool pots
高速全圓螺帽 適用於高轉速 protect taper surface
全圓結構風切聲小且偏擺較
佳，適合高速加工 For High Speed • Required space 140 x 100 mm
容許主軸轉速25000 rpm
標準PFK刀柄本體

Standard PFK collet chuck body PFK suitable for general machining.
Standard nut
一般場合使用
一般標準螺帽

Run out ≤ 5µ can be obtained by yes of the PARFAITE P grade 3µ collet.
配合PARFAITE 3µ P筒夾，偏擺可達≤5µ
28