Page 31 - 普慧2020刀把(電子書版)
P. 31

螺帽選用說明
 Description For Choosing Nut

 Standard type ER collet chuck body


 ER-BR  Ball  bearing  nut  are  special
 Ball bearing nut for high   machined and therefore suitable for
 speed  high speed application.
 高速用鋼珠螺帽  鋼珠及螺帽皆經過特殊加工，可
 適用於高速加工      precision for professionals

 標準ER刀柄本體  ER-B  Better clamping force and accuracy

 Standard ER collet chuck body  Ball bearing nut  thus more suitable for very precise
 machining.
 鋼珠螺帽        PF-Clamp
 可提昇夾持力及精度，適用於高
 精度加工

              The new
 ER  Suitable for general machining.  tool assembly device
 Standard type
 一般場合使用
 一般標準螺帽       鎖刀座


 Run out ≤ 5µ can be obtained by yes of the PARFAITE HP grade 3µ collet.
 配合PARFAITE HP級3µ 筒夾，偏擺可達≤5µ
              主要特點
 Mini type ER collet chuck body  •  刀具組裝與分解過程極其穩定、安全。
              •  使用輕巧，僅需較小的鎖緊力即可完成刀具裝卸。
 ER-MS  The outer diameter is same as ERM   •  不需其他工具，即可輕鬆完成各種規格更換。
 Small  outer  diameter  for   nut but the immersion is symmetri-        PF-Clamp
 high speed  cal.  It  is  suitable  for  high  speed   •  可對應多種錐柄型式DIN、BT、CAT、HSK、CAPTO、
 machining.

                KM、VDI。                                                  Sensationally simply – simply sensationally
 高速用小徑螺帽  外徑尺寸與ER-M相同，但尺寸
 對稱，可適用於高速加工  •  採用更換式黃銅套來保護刀把的柄部。                                       The new
 小徑ER刀柄本體     •  鎖刀座採小體積設計，佔用面積僅140mmX100mm。                             tool assembly device
 Mini type ER collet chuck body  ER-M  The outer diameter of nut is smaller
 Small outer diameter  than standard nut. It is suitable in              •  Secure tool assembling
 the situation of interference.
 小徑螺帽                                                                    •  minimum locking force needed
 外徑尺寸較標準螺帽小，適用                                                           •  Quick-change function for different taper
 於有干涉之場合                                                                   interfaces - w/o additional tooling
                                                                         •  Accident free assembling of cutting tools
 Standard PFK collet chuck body                                          •  Spring-loaded locking pin
                                                                         •  Mechanical security pin
 PFK-S  Better run-out and low noise when                                •  Better tool clamping thanks
 High speed fully round nut  rotating thus more suitable for high          to optimum ergonomics
 speed application.                                                      •  Replaceable brass tool pots
 高速全圓螺帽                                                                    protect taper surface
 全圓結構風切聲小且偏擺較
 佳，適合高速加工                                                                •  Required space 140 x 100 mm

 標準PFK刀柄本體

 Standard PFK collet chuck body  PFK  suitable for general machining.
 Standard type
 一般場合使用
 一般標準螺帽


 Run out ≤ 5µ can be obtained by yes of the PARFAITE P grade 3µ collet.
 配合PARFAITE 3µ P筒夾，偏擺可達≤5µ
                                                                                                                  29
   26   27   28   29   30   31   32   33   34   35   36