Page 30 - 普慧2020刀把(電子書版)

螺帽選用說明
Description For Choosing Nut

Standard type ER collet chuck body

ER-BR Ball bearing nut are special
Ball bearing nut for high machined and therefore suitable for
speed high speed application.
高速用鋼珠螺帽 鋼珠及螺帽皆經過特殊加工，可
適用於高速加工 precision for professionals

標準ER刀柄本體 ER-B Better clamping force and accuracy

Standard ER collet chuck body Ball bearing nut thus more suitable for very precise
machining.
鋼珠螺帽 PF-Clamp
可提昇夾持力及精度，適用於高
精度加工

The new
ER Suitable for general machining. tool assembly device
Standard type
一般場合使用
一般標準螺帽 鎖刀座

Run out ≤ 5µ can be obtained by yes of the PARFAITE HP grade 3µ collet.
配合PARFAITE HP級3µ 筒夾，偏擺可達≤5µ
主要特點
Mini type ER collet chuck body • 刀具組裝與分解過程極其穩定、安全。
• 使用輕巧，僅需較小的鎖緊力即可完成刀具裝卸。
ER-MS The outer diameter is same as ERM • 不需其他工具，即可輕鬆完成各種規格更換。
Small outer diameter for nut but the immersion is symmetri- PF-Clamp
high speed cal. It is suitable for high speed • 可對應多種錐柄型式DIN、BT、CAT、HSK、CAPTO、
machining.

KM、VDI。 Sensationally simply – simply sensationally
高速用小徑螺帽 外徑尺寸與ER-M相同，但尺寸
對稱，可適用於高速加工 • 採用更換式黃銅套來保護刀把的柄部。 The new
小徑ER刀柄本體 • 鎖刀座採小體積設計，佔用面積僅140mmX100mm。 tool assembly device
Mini type ER collet chuck body ER-M The outer diameter of nut is smaller
Small outer diameter than standard nut. It is suitable in • Secure tool assembling
the situation of interference.
小徑螺帽 • minimum locking force needed
外徑尺寸較標準螺帽小，適用 • Quick-change function for different taper
於有干涉之場合 interfaces - w/o additional tooling
• Accident free assembling of cutting tools
Standard PFK collet chuck body • Spring-loaded locking pin
• Mechanical security pin
PFK-S Better run-out and low noise when • Better tool clamping thanks
High speed fully round nut rotating thus more suitable for high to optimum ergonomics
speed application. • Replaceable brass tool pots
高速全圓螺帽 protect taper surface
全圓結構風切聲小且偏擺較
佳，適合高速加工 • Required space 140 x 100 mm

標準PFK刀柄本體

Standard PFK collet chuck body PFK suitable for general machining.
Standard type
一般場合使用
一般標準螺帽

Run out ≤ 5µ can be obtained by yes of the PARFAITE P grade 3µ collet.
配合PARFAITE 3µ P筒夾，偏擺可達≤5µ
28