HSK-A-SR
SR SLIM TYPE SHRINK FIT CHUCK-HSK-A
HSK50A /HSK63A/ HSK100A
Run out≦0.003mm
Slender design, can overcome interference processing, rough and fine processing can be corresponded
After a special heat treatment process, the best accuracy and life can be maintained
The tool is clamped 360° all around, the rigidity can be greatly improved
Full range of dynamic balance
The shrink machine is available in high-end/economical styles
動平衡 Balancing
Max.25,000 RPM Or U<= 1gmm
Max.25,000 RPM Or U<= 1gmm
Dimensions
Comparison of size indication and detailed specifications
| Order No. Order number | ∅d | ∅d1 | ∅d2 | L | L1 | L2 | L3 | Tool Clamping Depth L4 Tool clamping depth | Screw Adjustment screw |
|---|---|---|---|---|---|---|---|---|---|
| HSK50A SR04-125 | 4 | 10 | 19.7 | 125 | 99 | 96.2 | 20 | min15 | |
| HSK50A SR06-125 | 6 | 12 | 21.7 | 125 | 99 | 96.2 | 25 | 25.5~31.5 | HY06-M5 |
| HSK50A SR08-125 | 8 | 14 | 23.8 | 125 | 99 | 96.2 | 35 | 25.5~35.5 | HY08-M6 |
| HSK50A SR10-125 | 10 | 16 | 25.8 | 125 | 99 | 96.2 | 40 | 31.5~41.5 | HY08-M6 |
| Order No. Order number | ∅d | ∅d1 | ∅d2 | L | L1 | L2 | L3 | Tool Clamping Depth L4 Tool clamping depth | Screw Adjustment screw |
|---|---|---|---|---|---|---|---|---|---|
| HSK63A SR04-120 | 4 | 10 | 19 | 120 | 94 | 89.3 | 20 | min15 | |
| HSK63A SR04-150 | 4 | 10 | 22.1 | 150 | 124 | 119.3 | 20 | min15 | |
| HSK63A SR06-120 | 6 | 12 | 21 | 120 | 94 | 89.3 | 25 | 25.5~31.5 | HY06-M5 |
| HSK63A SR06-150 | 6 | 12 | 24.1 | 150 | 124 | 119.3 | 25 | 25.5~31.5 | HY06-M5 |
| HSK63A SR08-120 | 8 | 14 | 23.1 | 120 | 94 | 89.3 | 35 | 30.5~35.5 | HY08-M6 |
| HSK63A SR08-150 | 8 | 14 | 26.1 | 150 | 124 | 119.3 | 35 | 30.5~35.5 | HY08-M6 |
| HSK63A SR10-120 | 10 | 16 | 25.1 | 120 | 94 | 89.3 | 40 | 36.5~41.5 | HY08-M6 |
| HSK63A SR10-150 | 10 | 16 | 28.1 | 150 | 124 | 119.3 | 40 | 36.5~41.5 | HY08-M6 |
| HSK63A SR12-120 | 12 | 18 | 27.1 | 120 | 94 | 89.3 | 45 | 41.5~46.5 | HY14-M8 |
| HSK63A SR12-150 | 12 | 18 | 30.1 | 150 | 124 | 119.3 | 45 | 41.5~46.5 | HY14-M8 |
| Order No. Order number | ∅d | ∅d1 | ∅d2 | L | L1 | L2 | L3 | Tool Clamping Depth L4 Tool clamping depth | Screw Adjustment screw |
|---|---|---|---|---|---|---|---|---|---|
| HSK100A SR04-165 | 4 | 10 | 22.3 | 165 | 136 | 121.8 | 20 | min15 | |
| HSK100A SR06-165 | 6 | 12 | 24.3 | 165 | 136 | 121.8 | 25 | 25.5~31.5 | HY06-M5 |
| HSK100A SR08-165 | 8 | 14 | 26.4 | 165 | 134 | 121.8 | 35 | 30.5~35.5 | HY08-M6 |
| HSK100A SR10-165 | 10 | 16 | 28.4 | 165 | 136 | 121.8 | 40 | 36.5~41.5 | HY08-M6 |
| HSK100A SR12-165 | 12 | 18 | 30.4 | 165 | 136 | 121.8 | 45 | 41.5~46.5 | HY14-M8 |
Remarks
- Direct Clamping
- Tool shank diameter tolerance h6 (h6 Tooling Diameter Tolerance)
- HSK50A /HSK63A/ HSK100A
Precision Tool Holder Series Products
Deep hole machining・3μm high precision・Reduce tool loss
Shrink Fit Chuck
Shrink Fit Chuck
Quick tool change within 10 seconds・3μm high precision
Hydraulic Chuck
Hydraulic Chuck
Heavy cutting・5μm high precision・Super clamping torque
HER collet Chuck
Her Collet Chuck
