HSK-E 細長型熱縮刀把(刀桿) 細長型燒結刀把(刀桿)

HSK-E-SR

SR SLIM TYPE SHRINK FIT CHUCK-HSK-E

HSK25E/HSK32E/HSK40E/HSK50E
Run out≦0.003mm
Slender design, can overcome interference processing, rough and fine processing can be corresponded
After a special heat treatment process, the best accuracy and life can be maintained
The tool is clamped 360° all around, the rigidity can be greatly improved
Full range of dynamic balance
The shrink machine is available in high-end/economical styles

動平衡 Balancing

Parfaite Image Max.30,000 RPM Or U<= 1gmm
Parfaite Image Max.30,000 RPM Or U<= 1gmm

Dimensions

Comparison of size indication and detailed specifications

Parfaite Image
Order No.
Order number
∅d∅d1∅d2LL1L2L3Tool Clamping
Depth L4
Tool clamping depth
Screw
Adjustment screw
HSK25E SR04-03541012.5352523.5min15
HSK25E SR06-03561214.5352523.521.5~27
Order No.
Order number
∅d∅d1∅d2LL1L2L3Tool Clamping
Depth L4
Tool clamping depth
Screw
Adjustment screw
HSK32E SR04-6041013.6604039.120min15
HSK32E SR04-9041016.7907069.130min15
HSK32E SR06-06061215.7604039.13025.5~31.5
HSK32E SR06-09061218.7907069.14025.5~31.5HY06-M5
HSK32E SR08-06081417.7604039.13030.5~35.5
HSK32E SR08-09081420.7907069.14030.5~35.5HY08-M6
HSK32E SR10-060101619.7604039.13036.5~41.5
HSK32E SR10-090101622.8907069.14536.5~41.5HY08-M6
Order No.
Order number
∅d∅d1∅d2LL1L2L3Tool Clamping
Depth L4
Tool clamping depth
Screw
Adjustment screw
HSK40E SR04-09041016.8907067.220min15
HSK40E SR04-12041019.812010097.220min15
HSK40E SR06-09061218.7907067.22525.5~31.5HY06-M5
HSK40E SR06-12061221.812010097.22525.5~31.5HY06-M5
HSK40E SR08-09081420.8907067.23530.5~35.5HY06-M5
HSK40E SR08-12081423.912010097.23530.5~35.5HY08-M5
HSK40E SR10-090101622.8907067.24036.5~41.5HY08-M6
HSK40E SR10-120101625.912010097.24036.5~41.5HY08-M6
Order No.
Order number
∅d∅d1∅d2LL1L2L3Tool Clamping
Depth L4
Tool clamping depth
Screw
Adjustment screw
HSK50E SR04-12541019.71259996.220min15
HSK50E SR06-12561221.71259996.22525.5~31.5HY06-M5
HSK50E SR08-12581423.81259996.23530.5~35.5HY08-M6
HSK50E SR10-125101625.81259996.24036.5~41.5HY08-M6

Remarks

  • Direct Clamping
  • Tool shank diameter tolerance h6 (h6 Tooling Diameter Tolerance)
  • If you need to match the central outlet pipe, please refer toSpecification Table
  • If you need a water outlet knife handle, please refer toSelection instructions
  • HSK25E/HSK32E/HSK40E/HSK50E

Precision Tool Holder Series Products

Deep hole machining・3μm high precision・Reduce tool loss

Shrink Fit Chuck

Shrink Fit Chuck

Shrink Fit Chuck

Quick tool change within 10 seconds・3μm high precision

Hydraulic Chuck

Hydraulic Chuck

Hydraulic Chuck

Heavy cutting・5μm high precision・Super clamping torque

HER collet Chuck

Her Collet Chuck

Her Collet Chuck

Download Center: {{ filename }}

We will send you a download link via email.

Thanks for submitting!

We will email you shortly