BT-SR
SR SLIM TYPE SHRINK FIT CHUCK-BT
BT30/BT40/BT50
Run out≦0.003mm
Slim design, can overcome interference processing, rough and fine processing can be corresponded
After a special heat treatment process, the chuck can maintain best accuracy and life.
The tool is clamped 360° all around. The rigidity can be greatly improved
Full range of dynamic balance
The shrink machine is available in high-end/economical styles
動平衡 Balancing
BT30/BT40 Max.25,000 RPM Or U<= 1gmm
BT50 Max.20,000 RPM Or U<= 1gmm
BT30/BT40 Max.25,000 RPM Or U<= 1gmm
BT50 Max.20,000 RPM Or U<= 1gmm
Dimensions
Comparison of size indication and detailed specifications
| Order No. Order number | ∅d | ∅d1 | ∅d2 | L | L1 | L2 | L3 | Tool Clamping Depth L4 Tool clamping depth | Screw Adjustment screw |
|---|---|---|---|---|---|---|---|---|---|
| BT30(BTT30) SR04-090 | 4 | 10 | 16.6 | 90 | 68 | 65.2 | 20 | min15 | |
| BT30(BTT30) SR04-120 | 4 | 10 | 19.6 | 120 | 98 | 95.2 | 20 | min15 | |
| BT30(BTT30) SR06-090 | 6 | 12 | 18.5 | 90 | 68 | 65.2 | 25 | 25.5~31.5 | HY06-M5 |
| BT30(BTT30) SR06-120 | 6 | 12 | 21.6 | 120 | 98 | 95.2 | 25 | 25.5~31.5 | HY06-M5 |
| BT30(BTT30) SR08-090 | 8 | 14 | 20.6 | 90 | 68 | 65.2 | 35 | 30.5~35.5 | HY06-M68 |
| BT30(BTT30) SR08-120 | 8 | 14 | 23.7 | 120 | 98 | 95.2 | 35 | 30.5~35.5 | HY08-M6 |
| BT30(BTT30) SR10-090 | 10 | 16 | 22.6 | 90 | 68 | 65.2 | 40 | 36.5~41.5 | HY08-M6 |
| BT30(BTT30) SR10-120 | 10 | 16 | 25.7 | 120 | 98 | 95.2 | 40 | 36.5~41.5 | HY08-M6 |
| Order No. Order number | ∅d | ∅d1 | ∅d2 | L | L1 | L2 | L3 | Tool Clamping Depth L4 Tool clamping depth | Screw Adjustment screw |
|---|---|---|---|---|---|---|---|---|---|
| BT40(BTT40) SR04-120 | 4 | 10 | 18.9 | 120 | 93 | 88.3 | 20 | min15 | |
| BT40(BTT40) SR04-150 | 4 | 10 | 22 | 150 | 123 | 118.3 | 20 | min15 | |
| BT40(BTT40) SR06-120 | 6 | 12 | 20.9 | 120 | 93 | 88.3 | 25 | 25.5~31.5 | HY06-M5 |
| BT40(BTT40) SR06-150 | 6 | 12 | 24 | 150 | 123 | 118.3 | 25 | 25.5~31.5 | HY06-M5 |
| BT40(BTT40) SR08-120 | 8 | 14 | 23 | 120 | 93 | 88.3 | 35 | 30.5~35.5 | HY08-M6 |
| BT40(BTT40) SR08-150 | 8 | 14 | 26 | 150 | 123 | 118.3 | 35 | 30.5~35.5 | HY08-M6 |
| BT40(BTT40) SR10-120 | 10 | 16 | 25 | 120 | 93 | 88.3 | 40 | 36.5~41.5 | HY08-M6 |
| BT40(BTT40) SR10-150 | 10 | 16 | 28 | 150 | 123 | 118.3 | 40 | 36.5~41.5 | HY08-M6 |
| BT40(BTT40) SR12-120 | 12 | 18 | 27 | 120 | 93 | 88.3 | 45 | 41.5~46.5 | HY14-M8 |
| BT40(BTT40) SR12-150 | 12 | 18 | 30 | 150 | 123 | 118.3 | 45 | 41.5~46.5 | HY14-M8 |
| Order No. Order number | ∅d | ∅d1 | ∅d2 | L | L1 | L2 | L3 | Tool Clamping Depth L4 Tool clamping depth | Screw Adjustment screw |
|---|---|---|---|---|---|---|---|---|---|
| BT50(BTT50) SR04-135 | 4 | 10 | 18.4 | 135 | 97 | 82.8 | 20 | min15 | |
| BT50(BTT50) SR04-165 | 4 | 10 | 21.4 | 165 | 127 | 112.8 | 20 | min15 | |
| BT50(BTT50) SR06-135 | 6 | 12 | 20.4 | 135 | 97 | 82.8 | 25 | 25.5~31.5 | HY06-M5 |
| BT50(BTT50) SR06-165 | 6 | 12 | 23.4 | 165 | 127 | 112.8 | 25 | 25.5~31.5 | HY06-M5 |
| BT50(BTT50) SR08-135 | 8 | 14 | 22.4 | 135 | 97 | 82.8 | 35 | 30.5~35.5 | HY08-M6 |
| BT50(BTT50) SR08-165 | 8 | 14 | 25.5 | 165 | 127 | 112.8 | 35 | 30.5~35.5 | HY08-M6 |
| BT50(BTT50) SR10-135 | 10 | 16 | 24.4 | 135 | 97 | 82.8 | 40 | 36.5~41.5 | HY08-M6 |
| BT50(BTT50) SR10-165 | 10 | 16 | 27.5 | 165 | 127 | 112.8 | 40 | 36.5~41.5 | HY08-M6 |
| BT50(BTT50) SR12-135 | 12 | 18 | 26.4 | 135 | 97 | 82.8 | 45 | 41.5~46.5 | HY14-M8 |
| BT50(BTT50) SR12-165 | 12 | 18 | 29.5 | 165 | 127 | 112.8 | 45 | 41.5~46.5 | HY14-M8 |
Remarks
- Direct Clamping
- Tool shank diameter tolerance h6 (h6 Tooling Diameter Tolerance)
- If you need a water outlet knife handle, please refer toSelection instructions
- BT30/BT40/BT50
Precision Tool Holder Series Products
Deep hole machining・3μm high precision・Reduce tool loss
Shrink Fit Chuck
Shrink Fit Chuck
Quick tool change within 10 seconds・3μm high precision
Hydraulic Chuck
Hydraulic Chuck
Heavy cutting・5μm high precision・Super clamping torque
HER collet Chuck
Her Collet Chuck
Thanks for submitting!
We will email you shortly