SK 標準型熱縮刀把(刀桿) 標準型燒結刀把(刀桿)

SK-CR

CR STANDARD SHRINK FIT CHUCK-SK

Deflection runout≦0.003mm (4 times length)
After a special heat treatment process, the best accuracy and life can be maintained
The tool is clamped 360° all around, the rigidity can be greatly improved
Super clamping force, can correspond to rough and fine machining
Full range of dynamic balance
The shrink machine is available in high-end/economical styles

動平衡 Balancing

Parfaite Image SK40 Max.25,000 RPM Or U<= 1gmm
Parfaite Image SK50 Max.20,000 RPM Or U<= 1gmm
Parfaite Image SK40 Max.25,000 RPM Or U<= 1gmm
Parfaite Image SK50 Max.20,000 RPM Or U<= 1gmm

Dimensions

Comparison of size indication and detailed specifications

Parfaite Image
Order No.
Order number
FIG∅d∅d1∅d2∅d3LL1L2Tool Clamping
Depth L3
Tool clamping depth
L4Screw
Adjustment screw
SK40 CR04-0801414218060.940.7min15
SK40 CR06-0801621278060.934.325.5~31.5HY06-M5
SK40 CR06-13026212731.9130110.938.125.5~31.5108.1HY08-M6
SK40 CR08-0801821278060.934.330.5~35.5HY08-M6
SK40 CR08-13028212731.9130110.938.130.5~35.5108.1HY08-M6
SK40 CR10-08011024328060.94736.5~41.5HY08-M6
SK40 CR10-130210243236.4130110.950.836.5~41.5108.1HY08-M6
SK40 CR10-160210243239.6160140.950.836.5~41.5138.1HY08-M6
SK40 CR12-08011224328060.94741.5~46.5HY14-M8
SK40 CR12-130212243236.4130110.950.841.5~46.5108.1HY14-M8
SK40 CR12-160212243239.6160140.950.841.5~46.5138.1HY14-M8
Order No.
Order number
FIG∅d∅d1∅d2∅d3LL1L2Tool Clamping
Depth L3
Tool clamping depth
L4Screw
Adjustment screw
SK50 CR06-0801621278060.934.325.5~31.5HY06-M5
SK50 CR06-13026212731.2130110.938.125.5~31.5101.4HY06-M5
SK50 CR06-16026212734.4160140.938.125.5~31.5131.4HY06-M5
SK50 CR08-0801821278060.934.330.5~35.5HY08-M6
SK50 CR08-13028212731.2130110.938.130.5~35.5101.4HY08-M6
SK50 CR08-16028212734.4160140.938.130.5~35.5131.4HY08-M6
SK50 CR10-08011024328060.94736.5~41.5HY08-M6
SK50 CR10-130210243235.7130110.950.836.5~41.5101.4HY08-M6
SK50 CR10-160210243238.9160140.950.836.5~41.5131.4HY08-M6
SK50 CR12-08011224328060.94741.5~46.5HY14-M8
SK50 CR12-130212243235.7130110.950.841.5~46.5101.4HY14-M8
SK50 CR12-160212243238.9160140.950.841.5~46.5131.4HY14-M8

Remarks

  • Tool shank diameter tolerance h6 (h6 Tooling Diameter Tolerance)
  • If you need a water outlet knife handle, please refer toSelection instructions

Precision Tool Holder Series Products

Deep hole machining・3μm high precision・Reduce tool loss

Shrink Fit Chuck

Shrink Fit Chuck

Shrink Fit Chuck

Quick tool change within 10 seconds・3μm high precision

Hydraulic Chuck

Hydraulic Chuck

Hydraulic Chuck

Heavy cutting・5μm high precision・Super clamping torque

HER collet Chuck

Her Collet Chuck

Her Collet Chuck

Download Center: {{ filename }}

We will send you a download link via email.

Thanks for submitting!

We will email you shortly