HSK-E 標準型熱縮刀把(刀桿) 標準型燒結刀把(刀桿)

HSK-E-CR

CR STANDARD SHRINK FIT CHUCK-HSK-E

HSK32E/HSK40E/HSK50E
Run out≦0.003mm
Slender design, can overcome interference processing, rough and fine processing can be corresponded
After a special heat treatment process, the best accuracy and life can be maintained
The tool is clamped 360° all around, the rigidity can be greatly improved
Full range of dynamic balance
The shrink machine is available in high-end/economical styles

動平衡 Balancing

Parfaite Image Max.30,000 RPM Or U<= 1gmm
Parfaite Image Max.30,000 RPM Or U<= 1gmm

Dimensions

Comparison of size indication and detailed specifications

Parfaite Image
Order No.
Order number
∅d∅d1∅d2LL1L2Tool Clamping
Depth L4
Tool clamping depth
Screw
Adjustment screw
HSK32E CR04-06041419.9604020min15
HSK32E CR06-07062126705028.625.5~31.5HY06-M5
HSK32E CR08-07082126705028.630.5~35.5HY08-M6
HSK32E CR10-080102426806038.236.5~41.5HY08-M6
Order No.
Order number
∅d∅d1∅d2LL1L2Tool Clamping
Depth L4
Tool clamping depth
Screw
Adjustment screw
HSK40E CR04-06041419.9604039.1min15
HSK40E CR08-08062127806034.325.5~31.5HY06-M5
HSK40E CR08-08082127806034.330.5~35.5HY08-M6
HSK40E CR10-08010243280604736.5~41.5HY08-M6
Order No.
Order number
∅d∅d1∅d2LL1L2Tool Clamping
Depth L4
Tool clamping depth
Screw
Adjustment screw
HSK50E CR04-08041421805440.7min15
HSK50E CR06-08062127805434.325.5~31.5HY06-M5
HSK50E CR08-08082127805434.330.5~35.5HY08-M6
HSK50E CR10-08510243285594736.5~41.5HY08-M6
HSK50E CR12-09012243290644741.5~46.5HY14-M8
HSK50E CR16-095162734956940.744.5~49.5HY18-M12

Remarks

  • Tool shank diameter tolerance h6 (h6 Tooling Diameter Tolerance)
  • If you need to match the central outlet pipe, please refer toSpecification Table
  • If you need a water outlet knife handle, please refer toSelection instructions
  • HSK32E/HSK40E/HSK50E

Precision Tool Holder Series Products

Deep hole machining・3μm high precision・Reduce tool loss

Shrink Fit Chuck

Shrink Fit Chuck

Shrink Fit Chuck

Quick tool change within 10 seconds・3μm high precision

Hydraulic Chuck

Hydraulic Chuck

Hydraulic Chuck

Heavy cutting・5μm high precision・Super clamping torque

HER collet Chuck

Her Collet Chuck

Her Collet Chuck

Download Center: {{ filename }}

We will send you a download link via email.

Thanks for submitting!

We will email you shortly